How to Replace a Kia Sportage Replacement Key
The key on many Kia models comes with an entry system that is keyless in. This key usually resembles the remote control and can be replaced with a new one from a Kia dealer or a locksmith.
Key fobs may stop working due to a number of reasons, including batteries that are dead, worn-out buttons signal interference, or water damage. Here are some tips to assist you in getting your Kia sportage replacement key to work again.
How do you replace a remote key or smartkey
The battery inside your Kia's smart key will eventually have to be replaced, whether it is a remote key that starts with a push button or a standard metal key that does not contain transponder. This is especially when your car displays a message telling you that the remote or smart keys are not powered by batteries.
This is a relatively simple process. To replace the battery in the keyfob, remove your mechanical key from the slot at the back of the fob. Then, pry the cover open. A small screw will be in the key fob to hold the battery in the correct position. Remove the old battery by removing the screw using the help of a small screwdriver. Then insert the new one and close the slit on the key fob.
Once the key fob has a fresh battery, test it by pressing the lock and unlock buttons. You're in good shape if the doors lock and unlock as you expect. You can now use Kia's hands-free lock/unlock function whenever your fingers get chilly or you need to run some errands in Brandon.
Note: Some key fobs could need to be programmed (transponder chips or smart keys). This requires a special programming machine that only the dealer or automotive locksmith has access to. Other keys (non-transponder metal keys) do not require programming. If your key requires to be programmed again, you must be aware of the number printed on the key code tag and record it in a safe place.
How to replace the battery
If your Kia key fob isn't responding to pressing the lock or unlock button on the fob, it is a clear indication that the battery should be replaced. A weak battery could cause other issues, like the check engine light appearing or the engine not running properly. Fortunately, replacing the battery on the key fob is a simple DIY task that requires only a few basic tools.
Make sure that you shut off your vehicle and shut all doors prior to starting. Locate the small plastic piece that is on the bottom of your key fob, and play with it until a metallic key slips out. This key can be placed inside the driver door handle to unlock your car.
To replace the key fob battery, take off the rear cover and use a pry bar tool to release the latch holding the black negative battery cable. Remove the old battery, and then position the new battery to ensure that its "+" side faces you, and the "-", negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into place, avoiding excessive force to avoid damaging or breaking the contacts made of metal.
After how to reprogram kia key fob www.thekeylab.co.uk have installed the new battery, turn the key fob on and off in the ignition until the door locks cycle. You can then test your Kia's key fob once more to ensure it's working as intended.
How can you replace the smart key
You may have either a standard keyfob, or a Smart Key based on the model of Kia Sportage. The difference is that the smart key is equipped with the small blade of a key tucked inside it, while the standard key fob does not. Both types of key fobs have a battery inside them that eventually will need to be replaced. This is a straightforward process that takes only two minutes.
Make sure you turn off your Kia and stand on a level, well-lit surface before you begin. Be aware that there are small parts inside the fob that can fall out if not careful.
The release button for the small size is located on the lower backside. It will be a circular button or rectangular slot. When you press it mechanical key blade, it will be released and you can then open the key fob.
After the key fob has been removed, you can remove the battery that was in it. The new battery is C2032, and can be purchased from a local or online auto parts store. Once you're done with the battery, you should be able to lock or unlock your vehicle with your key fob even if your engine isn't running!
How do you replace a broken mechanical key
The Kia keyfob can be a fantastic convenience, allowing us to lock or unlock our car with just pressing the button. However, like all devices, it can have problems at times. Luckily, there are steps that can be taken to fix these issues and keep our key fobs in good working condition for the long run.
A low or dead battery is one of the most common issues. This can cause the device to stop working completely or work intermittently. If this is what you are experiencing, replace the battery with an entirely new battery.
If this does not resolve the problem, use the flathead screwdriver that is standard to wedge the fob's plastic casing open. Be careful not to damage internal components or scratch the plastic. When the battery is open, carefully take off the battery that was removed and replace it with a brand new one.
After the new battery has been put installed, close and unlock the doors using the mechanical key (every Kia fob has an emergency mechanical key that can fit in the slot). Test the key fob and verify that it's working correctly. Contact a dealer or locksmith to resolve the problem in the event that the key fob is not working. Make sure they cut you an emergency key that can work for all trunk and door cylinders in order to prevent lockouts in the future.